ACL-UAV-12V for fuselage and tailplane installation
Especially for unmanned aerial vehicles, we developed the ACL-UAV-12V.
By the use of LEDs of the newest generation, we were able to achieve a brightness that would have been inconseivable a few years ago, whereby the power consumption could be aligned to the requirements.
In addition it has a remote control input and can be switched on and off ba a radio control unit with a pulse lengt of 1-2 msec or by potential free contacts (Relay).
The extremely bright, red rotating sequencing light flash has a beacon angle of 360° and is visible at 30° below and above the horizontal plane.
Because it is is completely sealed in high grade optic plastic like all our LED position lamps/ACLs, it is water and even saltwater resistent. As all electronic components are integrated in the ACL, there is no additional place for a black box needed and the only required mounting space is given by its dimensions.
For easy connection, the ACL is already provided with a 1,5/0,25 mm² four-wire-cable. It can be installed on the fuselage or tail plane by its flange footing and some additinal silicone.
A detailed installation instruction and shrinking tubes are included.
As world first we integrated a FLARM-Interface in a anti collision light for unmanned aerial vehicles in order to make the airspace more safe. The signals provided by the connected Power-FLARM unit increase the light pulses and therefore rises the attentivness.
|Operating voltage||10 - 17 volts D. C., typically: 12.8 - 13.4 volts (on board power supply)|
|Wattage||approx. 8 watts|
|Interface||FLARM and Remote Control|
|Height||approx. 39 mm|
|Flange to flange||approx. 61 mm|
|Drill hole||4.5 mm|
|Weight||approx. 85 gr incl. connecting cables|
|Warranty||5,000 operating hours or max. 3 years|