ACL-UAV-LiPo for fuselage installation
Especially for small UAVs we developed for you the new ACL-UAV-LiPo. It is designed to work with a lightweight two cell LiPo accu used in model aircrafts. With a 2S-600mAh accu it can be operated for more than one hour.
In order not to compromise the accu lifespan, the ACL-UAV-LiPo has a integratet voltage monitoring.
By the use of LEDs of the newest generation, we were able to achieve a
brightness that would have been inconseivable a few years ago, whereby the power
consumption could be aligned to the requirements.
In addition the ACL-UAV-LiPO has a remote control input and can be switched on and off by a radio control unit with a pulse lengt of 1-2 msec or by potential free contacts (Relay).
The extremely bright, red rotating sequencing light flash has a beacon angle of 360° and is visible at 30° below and above the horizontal plane.
Because it is is completely sealed in high grade optic plastic like all our LED
position lamps/ACLs, it is water and even saltwater resistent.
For easy connection, the ACL is already provided with a 1.0/0.25 mm² three-wire-cable. It can be installed on the fuselage or tail by its flange footing and additinal silicone.
A detailed installation instruction and shrinking tubes are included.
|Operating voltage||6.8 - 9 volts (DC), LiPo-Akku 2S|
|Wattage||approx. 5 watts|
|Interface||remote control input|
|Diameter||approx. 44 mm|
|Height||approx. 39 mm|
|Flange to flange||approx. 61 mm|
|Drill hole||4.5 mm|
|Weight||approx. 85 gr incl. connecting cables|
|Warranty||5,000 operating hours or max. 3 years|