Combination of position light, taillight and anti collision light
The EPTA-LSA is the advancement of EPTA and impresses through its enormous higher brightness. The EPTA-LSA exceeds the requirements of FAR 23 by far.
The Thiesen EPTA-LSA will be mounted on the wingtips and is a combination of position light, tail-light and anti-collision light. Similar to the Thiesen EPL shape three aircraft lights are arranged in one position lamp. In addition to the functionality EPL (Electronic Position Light - red / green) it includes a tail-light (EPL Taillight) and an anti-collision light (ACL). The weight of EPTA-LSA is <80 grams.
Again, the built-in ACL in the EPTA-LSA is prepared for the intelligent synchronization.
The EPTA-LSA is embedded together with its integrated entire control element in high-optic, scratchresistant plastic module.
The high-performance LEDs produce a brilliant green and red light.
The wingtip lights are pre-wired for easy connection to a four-wire cable with at least 1.0 mm² conductor cross section. Easy installation by a central screw and additional gluing with silicone. Installation instructions and the shrink tubing required for assembly are included in the EPL.
The integration of our well proven Intelligent Synchronization allowes a chronological sequence of power consumption for the connected anti collision lights and prevents battery and generator from becoming overloaded.
|Operating voltage||10 - 17 volts D. C., typically: 12.8 - 13.4 volts (on board power supply)|
|Wattage||approx. 20 watts|
|Fuse||5 Ampère (fusible cut-out or automatic fuse)|
|Dimensions||80 x 40 x 30 mm (L x W x H)|
|Drill hole||4.5 mm|
|Weight||approx. 76 g including connecting cable|
|Warranty||5,000 operating hours or max. 3 years|