ACL-UAV-LiPo

Electronic Anti Collision Light with remote control input for unmanned aircraft

ACL-UAV-LiPo for fuselage installation

Especially for small UAVs we developed for you the new ACL-UAV-LiPo. It is designed to work with a lightweight two cell LiPo accu used in model aircraft. With a 2S-600mAh accu it can be operated for more than one hour.

In order not to compromise the accu lifespan, the ACL-UAV-LiPo has a integrated voltage monitoring.

By the use of LEDs of the newest generation, we were able to achieve a brightness that would have been inconseivable a few years ago, whereby the power consumption could be aligned to the requirements.

In addition the ACL-UAV-LiPO has a remote control input and can be switched on and off by a radio control unit with a pulse length of 1-2 msec or by potential free contacts (Relay).

The extremely bright, red rotating sequencing light flash has a beacon angle of 360° and is visible at 30° below and above the horizontal plane.

Because it is is completely sealed in high grade optic plastic like all our LED position lamps/ACLs, it is water and even saltwater resistent.

For easy connection, the ACL is already provided with a 1.0/0.25 mm² three-wire-cable. It can be installed on the fuselage or tail by its flange footing and additional silicone.

A detailed installation instruction and shrinking tubes are included.